En 10028-2 P295gh P355gh 16mo3 Steel Plate

• Type: Steel Plate
• Standard: ASTM, AISI, GB, JIS, DIN
• Certification: ISO, RoHS, IBR
• Surface Treatment: Coated
• Technique: Hot Rolled
• Application: Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate
• Model NO.: KM-20200111
• Special Use: Cutting Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
• Stock: Not Stock
• Width: 1000mm~3000mm
• Length: 3000mm~12000mm
• Thickness: 6mm~80mm
• Steel Grade: P235gh P265gh P295gh P355gh 16mo3 13crmo4-5 10crmo
• Standards: En10028-2
• Brands: Baosteel, Xinyu Steel, Jinan Steel, etc
• Surface: Clean,Blasting and Painting According to Customer
• Package: Properly Packed for Ocean Freight Exportation
• Transport Package: Properly Packed for Ocean Freight Exportation
• Specification: Width: 1219mm~3200mm, Thickness: 3mm~60mm
• Trademark: Kingmetal
• Origin: Made in China
• HS Code: 72085190
• Production Capacity: 10000 Tons Per Month

Product Description

EN 10028-2 P295GH P355GH 16Mo3 Steel Plate

• Thickness:6mm-80mm
• Length: 3000mm~12000mm or as required
• Width: 1000mm-3000mm
• Application: Oil tank steel plate, High pressure boiler plate, Pressure vessel steel plate
• Supplementary Technology: hot rolled, controlled rolling, normalizing, annealed tempering, normalizing+ tempering, hardening + tempering, HIC, SSC, SPWHT, Third Party Test.
• Surface: Coated or Shot Blasting and Painting.
• Delivery state: Hot Rolled, Cold Rolled
• Steel Grade: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10

Product Scope:

Steel plate product available by EN10028-2 standard includes 5 steel grades: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10. EN 10028-2 is the European standard that specifies requirements for steel plate and sheet products for pressure equipment made of weld-able non-alloy and alloy steels with elevated temperature properties as specified. ANSON is an experienced boiler and pressure steel plate supplier which can offer you EN10028-2 steel plate of all grade and dimension range.

EN 10028-2 Chemical Composition:

Steel Grade	Number	C	Si	Mn	Pmax	Smax	Altotal	N	Cr	Cu^b	Mo	Nb	Ni	Ti	V	Others
P235GH	1.0345	≤0.16	≤0.35	0.60^cto1.20	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02	Cr+Cu+Mo+Ni: ≤0.70
P265GH	1.0425	≤0.20	≤0.40	0.80^cto1.40	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
P295GH	1.0481	0.08 to 0.20	≤0.40	0.90^cto1.50	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
P355GH	1.0473	0.10 to 0.22	≤0.40	1.10to1.70	0.025	0.015	≤0.020	≤0.012^d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
16Mo3	1.5415	0.12 to 0.20	≤0.35	0.40to0.90	0.025	0.010	e	≤0.012	≤0.30	≤0.30	0.25to0.35	-	≤0.30	-	-	-
18MnMo4-5	1.5414	≤0.20	≤0.40	0.90to1.50	0.015	0.005	e	≤0.012	≤0.30	≤0.30	0.45to0.60	-	≤0.30	-	-	-
20MnMoNi4-5	1.6311	0.15to 0.23	≤0.40	1.00to1.50	0.020	0.010	e	≤0.012	≤0.20	≤0.20	0.45to0.60	-	0.40to0.80	-	≤0.02	-
15NiCuMoNb5-6-4	1.6368	≤0.17	0.25to0.50	0.80to1.20	0.025	0.010	≤0.015	≤0.020	≤0.30	0.50to0.80	0.25to0.50	0.015to0.045	1.00to1.30	-	-	-
13CrMo4-5	1.7335	0.08to 0.18	≤0.35	0.40to1.00	0.025	0.010	e	≤0.012	0.70^fto1.15	≤0.30	0.40to0.60	-	-	-	-	-
13CrMoSi5-5	1.7336	≤0.17	0.50to0.80	0.40to0.65	0.015	0.005	e	≤0.012	1.00to1.50	≤0.30	0.45to0.65	-	≤0.30	-	-	-
10CrMo9-10	1.7380	0.08to0.14^g	≤0.50	0.40to0.80	0.020	0.010	e	≤0.012	2.00to2.50	≤0.30	0.90to1.10	-	-	-	-	-
12CrMo9-10	1.7375	0.10 to 0.15	≤0.30	0.30to0.80	0.015	0.010	0.010To0.040	≤0.012	2.00to2.50	≤0.25	0.90to1.10	-	≤0.30	-	-	-
X12CrMo5	1.7362	0.10 to 0.15	≤0.50	0.30to0.60	0.020	0.005	e	≤0.012	4.00to6.00	≤0.30	0.45to0.65	-	≤0.30	-	-	-
13CrMoV9-10	1.7703	0.11 to 0.15	≤0.10	0.30to0.60	0.015	0.005	e	≤0.012	2.00to2.50	≤0.20	0.90to1.10	≤0.07	≤0.25	0.03	0.25to0.35	≤0.002B≤0.015Ca
12CrMoV12-10	1.7767	0.10 to 0.15	≤0.15	0.30to0.60	0.015	0.005	e	≤0.012	2.75to3.25	≤0.25	0.90to1.10	≤0.07^h	≤0.25	0.03^h	0.20to0.30	≤0.003B^h≤0.015Ca^h
X10CrMoVNb9-1	1.4903	0.08 to 0.12	≤0.50	0.30to0.60	0.020	0.005	≤0.040	0.030to0.070	8.00to9.50	≤0.30	0.85to1.05	0.06to0.10	≤0.30	-	0.18to0.25	-

EN 10028-2 Mechanical Property

Steel Grade	Delivery State	Thickness mm	Yield Strength Mpa≥	Tensile Strength Mpa	Elongation %≥	Minimum Impact Power of Temperature
name	number	-20	0	+20
P235GH	1.0345	+N^d	≤16	235	360~480	24	27	34	40
			16	225
			40	215
			60	200
			100	185	350~480
			150	170	340~480
P265GH	1.0425	+N^d	≤16	265	410~530	22	27	34	40
			16	255
			40	245
			60	215
			100	200	400~530
			150	185	390~530
P295GH	1.0481	+N^d	≤16	295	460~580	21	27	34	40
			16	290
			40	285
			60	260
			100	235	440~570
			150	220	430~570
P355GH	1.0473	+N^d	≤16	355	510~650	20	27	34	40
			16	345
			40	335
			60	315	490~630
			100	295	480~630
			150	280	470~630
16Mo3	1.5415	+N^e	≤16	275	440~590	22	f	f	31
			16	270
			40	260
			60	240	430~560
			100	220	420~570
			150	210	410~570
18MnMo4-5	1.5414	+NT	≤60	345	510~650	20	27	34	40
			60	325
		+QT	150	310	480~620
20MnMoNi4-5	1.6311	+QT	≤40	470	590~750	18	27	40	50
			40	460	590~730
			60	450	570~710
			100	440
			150	400	560~700
15NiCuMoNb5-6-4	1.6368	+NT	≤40	460	610~780	16	27	34	40
			40	440
			60	430	600~760
		+Ntor+QT	100	420	590~740
		+QT	150	410	580~740

EN 10028-2 Equivalent Steel Grade:

Material	EN 10028-2	DIN 17155	NFA 36-205	UNI 5869	BS 1501	UNE 36087	ASTM	JIS G3115
1.0345	P235GH	HI	A37CP	Fe360-1KW	161 Gr. 360/  164 Gr. 360	A37 RCI	A285 Gr.C- A 414 Gr.C/ A516 Gr. 55	SPV24
1.0425	P265GH	HII	A4 CP	Fe410-1KW	161 Gr.400/  164 Gr. 400/  224 Gr. 400	A42 RCI	A414 Gr.E / A516 Gr. 60
1.0481	P295GH	17Mn4	A48CP	A48CP	224Gr.490	A47 RCI	A414 Gr.F /  A 516 Gr. 65	SPV32
1.0473	P355GH	19Mn6	A52CP	Fe510-1KW		A52 RCI	A414 Gr.G	SPV36
1.5415	16Mo3	15Mo3	15D3	15Mo3	1503 - 243 B	16Mo 3	A204 Gr.B
1.7335	13CrMo4-5	13CrMo44	15CD4-05	14CrMo4.5	620 Gr.27	14 CrMo 4.5	A387 Gr. 12
1.738	10CrMo9-10	10CrMo910	10CD9.10		622 Gr.31		A387 Gr. 22
1.7383	11CrMo9-10			12CrMO 9.10		12 CrMo 9.10