EN10216-5 1.4541 Seamless stainless steel pipe
1. Seamless stainless steel pipe:
Size-- 1/8" to 24"(DN6-600)10.3mm~610mm
Material--
1.4541
Standard--
EN10216-5
2. Welded stainless steel pipe:
Size-- 1/8" to 48"(DN6-1200)10.3mm~1219mm.
Material--
EN10216-5
Standard--
1.4541
3. Aplication: Boiler, heater exchanger, food, paper making, metallurgy, shipbuilding, environmental protection, pressure container, water, electricity etc.
Chemical composition % of steel 1.4541/SS321/12X18H10T
Ti = 5 * C to 0.7
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. |
| C |
Si |
Mn |
Ni |
P |
S |
Cr |
Ti |
| max 0.08 |
max 1 |
max 2 |
9 - 12 |
max 0.045 |
max 0.015 |
17 - 19 |
max 0.7 |
Mechanical properties of 1.4541/SS321/12X18H10T
|
| Rm - Tensile strength (MPa) (+A) |
500-720 |
|
| Rm - Tensile strength (MPa) (+AT+C) |
810-850 |
|
| Rm - Tensile strength (MPa) (+AT) |
460-730 |
|
| Rp0.2 0.2% proof strength (MPa) (+A) |
190-225 |
|
| Rp0.2 0.2% proof strength (MPa) (+AT) |
180-200 |
Equivalent grades of steel X6CrNiTi18-10 (1.4541)
Only for reference
EU
EN |
USA
- |
Germany
DIN,WNr |
Japan
JIS |
France
AFNOR |
England
BS |
Italy
UNI |
China
GB |
Sweden
SS |
Poland
PN |
Czechia
CSN |
Finland
SFS |
Austria
ONORM |
Russia
GOST |
| X6CrNiTi18-10 |
|
| X10CrNiTi18-9 |
| X6CrNiTi18-10 |
|
|
|
|
|
| 0Cr18Ni10Ti |
| 1Cr18Ni11Ti |
| H0Cr20Ni10Ti |
|
|
|
|
|
|
| 08KH18N10T |
| 08KH18N12T |
| 12KH18N10T |
|
Audited Supplier 
){kind=link}