En 10216-2 13crmo4-5 Seamless Steel Tubes

• Customization: Available
• Type: Seamless
• Technique: Cold Drawn
• Model NO.: KM-20201019
• Material: Alloy Steel
• Surface Treatment: Black
• Usage: Pipeline Transport, Boiler Pipe, Machinery Industry, Chemical Industry, Special Purpose
• Section Shape: Round
• Outside Diameter: 21mm~509mm
• Thickness: 2.1~30mm
• Length: 5.8m, 6m, 11.8m, 12m, or as Required.
• Standards: En 10216-2
• Materials: 13crmo4-5
• Transport Package: in Bundle, or Customer′s Request
• Specification: 10 mm~610mm
• Trademark: Kingmetal
• Origin: China
• HS Code: 73045990
• Production Capacity: 500 Tons/Month

Product Description

EN 10216-2 13CRMO4-5 SEAMLESS STEEL TUBES

 
Standard:EN 10216-2
Seamless steel tubes for pressure purposes -Technical delivery conditions
Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
 
EN 10216-2 13CrMo4-5 Seamless steel tubes for pressure purposes
 
 
EN 10216-2 13CrMo4-5 Seamless steel tubes Quick Details
Manufacture:Seamless process
Wall thickness(WT): 2.1mm--30 mm.
Outer diameter (OD): 21 mm--509mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded
 
Additional Info
Port of Shipment: Tianjin, China
Payment Terms:T / T, LC
Delivery: 35 days after payment
Surface: Tubes will be varnished (Outside only) to prevent rust.
Marking: Standard + Steel Grade + Size + Heat No + Lot No
Package: Bundles (hexagonal),Wooden Boxes,Crates (steel/wooden) or as required
 
 
The steel name of non-alloy steel grades
(1)The capital letter P for pressure purposes;
(2)The symbols GH for elevated temperature.
 
 
MANUFACTURING PROCESS
(1)Steel making process
Steels shall be fully killed.
(2)Tube manufacture and delivery conditions
The tubes shall be manufactured by a seamless process.
The tubes can be either hot or cold finished.
 
EN 10216-2 13CrMo4-5 Seamless steel tubes shall be supplied in the relevant heat treatment conditions as specified in Table 1.
 

Steel grade		Heat treatment a	Austenizing		Tempering
Steel name	Steel number		Temperature °C	Cooling Medium	Temperature °C	Cooling medium
13CrMo4-5	1.7335	+NT  b c	900 to 960	Air	680 to 750	air

 
 
Chemical composition of EN 10216-2 13CrMo4-5

Steel grade	Steel number	C	Si	Mn	P max	Smax
13CrMo4-5	1.7335	0,10 to 0,17	≤ 0,35	0,40 to 0,70	0,025	0,020

 

Cr	Mo	Ni	Al tot	Cu
0,70 to 1,15	0,40 to 0,60	≤ 0,30	≤ 0,040	≤ 0,30

Mechanical properties of EN 10216-2 13CrMo4-5

Steel grade		Upper yield strength or proof strength R eH or Rp 0,2 for Wall Thickness Tmin.				Tensile Strength Rm	Elongation A min. % a
Steel name	Steel number	T ≤ 16	16 < T ≤ 40	40 < T ≤ 60	60 < T ≤ 100		l	t
		MPa *	MPa *	MPa *	MPa *	MPa *
13CrMo4-5	1.7335	290	290	280	-	440 to 590	22	20

Note:l = longitudinal t = transverse
 
 
Dimensions tolerances of EN 10216-2
 
Tolerances on outside diameter and wall thicknes

Outside Diameter D mm	Tolerances on D	Tolerances on T for a T/D ratio
		≤ 0,025	> 0,025 ≤ 0,050	> 0,050 ≤ 0,10	> 0,10
D ≤ 219,1	± 1% or ± 0.5mm   whichever is the greater	± 12,5% or ± 0.4mm whichever is the greater
D > 219,1		± 20%	± 15%	± 12,5%	± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

 

Tolerances on inside diameter and wall thickness

Tolerances on inside diameter			Tolerances on T for a T/d ratio
d	d min		≤ 0,03	> 0,03 ≤ 0,06	> 0,06 ≤ 0,12	> 0,12
± 1% or ± 2 mm whichever is the greater	(+ 2% ,0)or (+ 4 mm,0)	whichever is the greater	± 20%	± 15%	± 12,5%	± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

 
 
Tolerances on outside diameter and minimum wall thickness

Outside diameter D mm	Tolerances on D	Tolerances on T min for a T min /D ratio
		≤ 0,02	> 0,02 ≤ 0,04	> 0,04 ≤ 0,09	> 0,09
D ≤ 219,1	± 1% or ± 0.5mm whichever is the greater	(+ 28%,0) or (+ 0.8 mm,0) whichever is the greater
D > 219,1		+ 50% 0	+ 35% 0	+ 28% 0	+ 22% a 0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

 
 
Tolerances on inside diameter and minimum wall thickness

Tolerances on inside diameter		Tolerances on T min for a T min /d ratio
d	d min	≤ 0,05	> 0,05 ≤ 0,1	> 0,1
± 1% or ± 2 mm whichever is the greater	(+2%,0) or (+ 4 mm,0) whichever is the greater	+ 35% 0	+ 28% 0	+ 22% a 0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

 
 
Tolerances on exact lengths
Dimension in mm

Length L	Tolerance on exact length
L ≤ 6000	+10 0
6000 < L ≤ 12 000	+15 0
L > 12 000	+ by agreement 0

 
 
TESTINGS
(1)Chemical analysis
(2)Tensile test(Tensile test at room temperature, Tensile test at elevated temperature)
(3)Flattening test
(4)Ring tensile test
(5)Drift expanding test
(6)Ring expanding test
(7)Impact test
(8)Leak tightness test(Hydrostatic test,  Electromagnetic test)
(9)Dimensional inspection
(10) Visual examination
(11) Non-destructive testing
 
 
MARKING
Marking to be applied
The marking shall be indelibly marked on each tube at least at one end. For tubes with outside diameter D ≤ 51 mm the marking on tubes may be replaced by the marking on a label attached to the bundle or box.
 
 
PROTECTION
The tubes will be delivered with A temporary protective coating or durable coating and/or lining
 
 
Photos of EN 10216-2 13CrMo4-5 Seamless steel tubes