ASTM P20 1.2330 35cmo4 Plastic Mould Steel

• Customization: Available
• Type: Alloy Steel Bar
• Standard: AISI, ASTM, GB, JIS, DIN, BS
• Model NO.: KM-20240718
• Technique: Hot Rolled
• Application: Structural Steel Bar, Tool Steel Bar, Die Steel Bar
• Surface Treatment: Polished
• Alloy: Alloy
• Special Use: Mold Steel
• Size: 8-1000mm
• Materials: P20 1.2330 35cmo4
• Secondary or Not: Non Secondary
• Surface: Pickled,Black,Bright,Polishing,etc
• Processing Method: Hot Work or Cold Drawn
• Packaging: in Bundles or Wooden Boxes
• Transport Package: in Bundle
• Specification: ASTM, JIS, En, DIN, GB, Ks
• Trademark: kingmetal
• Origin: China
• HS Code: 730723
• Production Capacity: 5000 Ton/Month

Product Description

ASTM P20 1.2330 35CMo4 Plastic Mould Steel

AISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc. P20 mold steel plate material is typically sold in the pre-hardened condition at a hardness of approximately 300 HBW.

P20 tool steel differs from area to area in the different countries.Europeans generally use the DIN spec-DIN EN ISO 4957 standard materials (1.2311 and 1.2312), while in Japan steel industry standard, PX5 is the new standard P20. And the Americas Countries, Grade steel P20 is the most and wide used steel grade material. In China, 3CrM2Mo is the P20 steel grade equivalent, which is in the standard GB/T 1299 tool steel specification.

AISI P20 tool steels are nitrided or carburized. These P20 mold steel materials steels are capable of being machined into complex and large dies and molds. Material P20 steel plate and round bars are mostly used in the carburized condition. The presence of chromium and nickel enhances the toughness and hardness of mold steel P20 grade material.
 

•   Material: P20 alloy mold steel round bar
•   Technique: forging,hot rolled, cold draw
•   Surface: black, turned and ground,bright
•   Diameter: 8 to 1000mm
•   Length: 2000 to 13000mm or customized
•  

Chemical Composition
C	Si	Mn	P	S	Cr	Mo	V	Ni
0.28-0.40	0.20-0.40	1.10-1.50	≤0.030	≤0.030	1.70-2.00	0.25-0.40	/	0.85-1.15

 

 P20 Characteristic

•   Good toughness properties;
•   Easy to machine;
•   Better polishability than 1.2312;
•   Dimensional stability flame hardenable;
•   Good photoengraving properties.

 Equivalent Grades

AISI	W-Nr	GB	DIN	JIS	BOHLER	Ss14
P20	1.2330	3Cr2Mo	35CrMo4	/	M202	618

Relevant P20 Tool Steel Specification and Equivalent Steel Grades

Country	USA	German	GB/T
Standard	ASTM A681	DIN EN ISO 4957	GB/T 1299
Grades	P20	1.2311	3Cr2Mo

AISI P20 Steel Plate Materials

ASTM A681	C		Mn		P	S	Si		Cr		Mo
P20	0.28	0.4	0.6	1	0.03	0.03	0.2	0.8	1.4	2	0.3	0.55
DIN ISO 4957	C		Mn		P	S	Si		Cr		Mo
1.2311	0.35	0.45	1.3	1.6	0.03	0.03	0.2	0.4	1.8	2.1	0.15	0.25
GB/T	C		Mn		P	S	Si		Cr		Mo
GBT 1299	0.28	0.4	0.6	1	0.03	0.03	0.2	0.8	1.4	2	0.3	0.55

4. ASTM P20 Mold Tool Steel Properties

Physical Properties

• Density: 0.284 lb/in3 (7861 kg/m3)
• Specific Gravity: 7.86
• Modulus of Elasticity: 30 x 106 psi (207 GPa)
• Thermal Conductivity:
• 24 Btu/ft/hr/°F
• 41.5 W/m/°K
• Machinability: 60-65% of a 1% carbon steel

P20 Steel Mechanical Properties

Properties	Metric
Hardness, Brinell (typical)	300
Hardness, Rockwell C (typical)	30
Tensile strength, ultimate	965-1030 MPa
Tensile strength, yield	827-862 MPa
Elongation at break (in 50 mm (2″))	20.00%
Compressive strength	862 MPa
Charpy impact (V-Notch)	27.1-33.9 J
Poisson's ratio	0.27-0.30
Elastic modulus	190-210 GPa