Customization: | Available |
---|---|
Type: | Steel Plate |
Standard: | ASTM, AISI, DIN, En |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Table 1:
Elements |
Heat Analysis, % |
||
---|---|---|---|
|
Grade C |
Grade D |
|
Carbon, max |
0.24 |
0.27 |
|
Manganese, max |
0.90 |
0.90 |
|
Phosphorus, max |
0.030 |
0.030 |
|
Sulfur, max |
0.030 |
0.030 |
|
Silicon Plates 1-1/2in. [40mm] and under, max Plates over 1-1/2in. [40mm] |
0.40 0.15-0.40 |
0.40 0.15-0.40 |
|
Copper, min % when copper is specified |
0.20 |
0.20 |
Table 2:
|
Grade C |
Grade D |
---|---|---|
Tensile strength, ksi [MPa] |
55-75 |
60-80 [415-550] |
Yield point, min, ksi [Mpa] |
30 |
33 [230] |
Elongation in 8 in. [200 mm], min, %B |
22 |
20 |
Elogination in 2 in. [50mm], min, %B |
25 |
23 |
B: For plates wider than 24 in. [600 mm], the elgonation requirement is reduced 2%.
The steel shall be killed and made by one or more of the following processes: