| Customization: | Available |
|---|---|
| Type: | Steel Plate |
| Standard: | ASTM, AISI, GB, DIN |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
S500mc, S700mc High Strength/Yield Steel Plate
High Yield Steel Plate has the capacity to endure structural loads up to the point of failure is measured as its yield strength. It offers enhanced resistance to an array of structural loads, in order to endure the severe actions innate in most demanding applications on earth. S500MC offer incomparable strength values post heat treatment and mechanical profiling. Due to its alloying content of low- to high-contents of titanium (Ti) and medium to ultra-high molybdenum (Mo) levels it is commonly suited for heat treatment and bending with no substantial drop in the yield behavior of the material. S500MC Sheet is used for cold formed components including cold pressed parts and sections. Its common applications include load bearing beams, steel frames, and pipework.
S700MC provides excellent bending and folding properties though case should be taken in order to ensure that it is at the right specification for the job. It can be welded both manually and using automatic equipment by means of all electrical welding processes provided the general technical rules are observed. S700MC Steel Plate should be normalised and stress relief annealing above 580 °C with long holding times results in a reduction of yield strength and tensile strength as compared to the 'asdelivered' condition which is why such heat treatments should be avoided. It is not suitable for hot-forming. If low-voltage annealing is necessary to compensate the welding stresses, the suggested annealing time between 530 °C and 580 °C is 30 minutes.
Kingmetal steel, is one of the leading High Yield Steel Plate supplier in China. We provide excellent quality of product which is been manufactured by using the advance technology.
Grades:
| Specification | High Strength Steel Plates |
|---|---|
| Thickness: | 3 MM To 250 MM |
| Production | Hot-Rolled (HR) and Cold-Rolled (CR) Manufacturer and Supplier |
| Application | Oil & Gas , Sugar Mills , Chemicals & Fertilizers Industries , Ship Building , Cement Industries , Paper Industries , Petrochemicals , etc |
| Width | 1000 MM To 3000 MM |
| Lengths: | up to 20 M |
S500mc, S700mc Plate Chemical Composition
|
Grade |
Carbon |
Silicon |
Manganese |
Phosphorus |
Sulfur |
Molybdenum |
Niobium |
Aluminium |
Vanadium |
Titanium |
Boron |
|
S500MC |
0.12 |
0.50 |
1.70 |
0.025 |
0.015 |
- |
0.09 |
0.015 |
0.20 |
0.15 |
- |
|
S700MC |
0.12 |
0.60 |
2.10 |
0.025 |
0.015 |
0.50 |
0.09 |
0.015 |
0.20 |
0.22 |
0.005 |
S500mc, S700mc Plate Mechanical Properties
|
Grade |
Yield Strength |
Tensile Strength |
Elongation A |
|
|
< 3mm |
≥ 3mm |
|||
|
S500mc |
≥ 500Mpa |
550-700MPa |
≥ 12% |
≥ 14% |
|
S700mc |
≥ 700Mpa |
650-950MPa |
≥ 10% |
≥ 12% |
){kind=link}