GOST 9567-75 Precision steel tubes
This standard is applied to steel pipes of particular accuracy after cold drawing or hot rolling.
Cold drawing pipes are produced of the following length:
Not fixed length - from 1 to 11.5 m
Fixed length - from 4.5 to 9 m.
Length multiplied fixed length - up to 9 m with allowance 5 mm for each cutting. Per customer request it can be stated another allowance.
Max length deviation for fixed and multiple length are to be + 10 mm.
roduction type of pipes | Max deviations | |
Outside diameter | Wall thickness | |
Sizes, mm | Deviations | Sizes, mm | Deviations | |
Cold drawn pipes | Up to 30 including | ± 0,10 mm | For pipes with OD 6 - 108 mm | |
Over 30 up to 40 including | ± 0,15 mm | Up to 0,8 including | ± 0,05 mm | |
Over 40 up to 50 including | ± 0,20 mm | Over 0,8 up to 5 including | ± 7,5 | |
Over 50 up to 60 including | ± 0,25 mm | Over 5 | ± 6% | |
Over 60 up to 70 including | ± 0,30 mm | For pipes with OD over 110 mm | |
Over 70 up to 80 including | ± 0,35 mm | Up to 2,5 including | ± 10% | |
Over 80 up to 90 including | ± 0,40 mm | Over 2,5 up to 5 including | + 10%, -7,5% | |
Over 90 up to 108 including | ± 0,45 mm | Over 5 | ± 7,5% | |
Over 108 up to 120 including | ± 0,50 mm | | | |
Over 120 | ± 0,8 % | | | |
Hot rolled pipes | Up to 50 including | ± 0,35 mm | Up to 15 including | ± 10% | |
Over 50 | ± 0,8% | Over 15 | ± 8% | |
If D/S = 4 - 10 | ± 6% | |
Mechanical composition | | |
Steel grade | Tensile strength, N/mm2 (min) | Yield strength, N/mm2 (min) | Elongation, % (min) | | |
| |
| |
10 | 343 | 206 | 24 | | |
20 | 412 | 245 | 21 | | |
35 | 510 | 294 | 17 | | |
45 | 589 | 323 | 14 | | |
40Х | 618 | - | 14 | | |
30ХГСА | 491 | - | 18 | | |
Chemical composition (%, max) | | |
Steel grade | C | Si | Mn | Cr | Ni | Mo | S | P | Cu | |
|
10 | 0,07-0,14 | 0,17-0,37 | 0,35-0,65 | 0,15 | 0,3 | - | - | - | - | |
20 | 0,17-0,24 | 0,17-0,37 | 0,35-0,65 | 0,25 | 0,25 | - | 0,03 | 0,025 | 0,3 | |
35 | 0,32-0,40 | 0,17-0,37 | 0,50-0,80 | 0,25 | 0,3 | - | 0,04 | 0,035 | 0,3 | |
45 | 0,42-0,45 | 0,17-0,37 | 0,50-0,80 | 0,25 | - | - | - | - | - | |
40Х | 0,36-0,44 | 0,17-0,37 | 0,50-0,80 | 0,80-1,10 | 0,3 | - | 0,035 | 0,035 | 0,3 | |
30ХГСА | 0,28-0,34 | 0,90-1,20 | 0,80-1,10 | 0,80-1,10 | 0,3 | - | 0,005 | 0,025 | - |
GOST 8731-87 seamless hot-deformed steel pipes-DIN 1629,ASTM A106B
GOST 8732-78 - seamless hot-deformed steel pipes,manufactured on the outside diameter, wall thickness and length.
EN GOST 8732-78 Seamless Hot-Deformed Steel Tubes-Range
GOST 8733-74 Seamless Cold and Warm Deformed Steel Tubes-Technical requirements
GOST 8734-75 Seamless Cold and Warm Deformed Steel tubes-Range
GOST 9567-75 Precision Steel Tubes-Range
GOST 9940-72 Seamless hot deformed tubes made of corrosion resistant steel
GOST 9941-72 Seamless cold and warm deformed tubes made of corrosion Resistant steel
GOST 10498-63 Especially thin walled seamless tubes made of corrosion resistant (stainless) steel
GOST 1060-76 Steel seamless cold-deformed tubes for shipbuilding-Technical requirements
GOST 5654-76 Steel seamless hot-deformed tubes for shipbuilding-Technical requirements
GOST 550-75 Steel seamless steel tubes for petroleum processing and petrochemical industry
GOST 14162-69 Small-sizes steel tubes (capillary )
GOST 10192-62 Bimetallic seamless tubes-Range
GOST 21945-76 Seamless hot-deformed steel tubes made of alloys on the basis of titanium-Technical
requirements
GOST 21729-76 Seamless cold-deformed and hot-deformed tubes made of structural carbon and alloyed steel
GOST 22786-77 Bimetallic seamless tubes for shipbuilding-Technical requirements
EN 10220 DIN 1630 High-performance seamless circular - Seamless circular unalloyed steel tubes