5754 Aluminium Alloy Coil Sheet Plate

• Customization: Available
• Color: Silver
• Application: Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations
• Model NO.: KM-20240929
• Technique: Hot Rolled
• Grade: 1000 Series
• Temper: T3 - T8
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Width: 500~3000mm
• Thickness: 0.2~300mm
• Length: 1000~16000mm
• Standards: En485-2,En754-2,En755-2
• Surface: Bright, Polished, Hair Line, Brush, Sand Blast, CH
• Finish: Mill, Customer Specific Finish
• Transport Package: in Wooden Pallets
• Specification: 500~10000mm
• Trademark: KINGMETAL
• Origin: China
• HS Code: 7606910000
• Production Capacity: 1000 Tons Per Month

Product Description

5754 Aluminum Alloy Coils and Sheets

Width:500~3000mm
Thickness:0.2~300mm
Length:1000~16000mm

5754 Aluminum Alloy

5754 aluminum alloy is a typical Al-Mg alloy containing 2,6-3,6% magnesium. The addition of magnesium precipitates Mg₂Si in the matrix to provide strengthening. Common tempers of the material have 5754-H111 and 5754 H22, H12, H14, H114 etc. Al 5754 has high strength resistance, excellent resistance to atmospheric and marine corrosion, excellent weldability and suitable for anodizing protection. Alloy 5754 is widely used in automotive body panels and frames, railways, ships (plates), electric power, transportation tanks, chemicals, food, forging and other industrial fields. Before being used in the automotive and aerospace industries, this aluminum alloy must be anodized to have a high microhardness.

5754 Aluminum Properties

The following tables summarize 5754 aluminum properties including chemical composition, physical and mechanical properties, etc.

Chemical Composition

The chemical composition of Al-5754 is given in the table below.

Chemical Composition
Aluminium	Si, ≤	Fe, ≤	Cu, ≤	Mn, ≤	Mg	Cr, ≤	Zn, ≤	Ti, ≤	Remark	Other Elements, Each (Total), ≤	Al
5754	0,40	0,40	0,10	0,50	2,6-3,6	0,30	0,20	0,15	0,10-0,6 Mn+Cr	0.05 (0.15)	Rest

Aluminum Alloy 5754 Physical Properties

Aluminum 5754 physical properties are listed in the data sheet below, including the aluminum density, melting point, coefficient of thermal expansion, Young's modulus, thermal conductivity, specific heat, electrical conductivity, and electrical resistivity, etc.

Note:

• 10^-6·K^-1 = 10^-6/K = 1 μm/m·°C
• 1 Ω·mm²/m = 1 μΩ·m
• 1 g/cm3 = 1 kg/dm3 = 1000 kg/m3
• 1 GPa = 1 kN/mm2
• 1 MPa = 1 N/mm2
• MS/m = 0,58 %IACS
• 1 cal/(g.C) = 1 Btu/(lb⋅F)

5754-O Physical Properties
Density (g/cm3)	2.68
Electrical Conductivity (%IACS)	32.5
Specific Electrical Resistivity (m/Wmm2)	53
Thermal conductivity (W/m · K)	132
Specific heat capacity (kJ/kg · K)	897
Liquidus temperature (°C)	645
Solidus temperature (°C)	595
Coefficient of linear thermal expansion, 10^-6/K	23.7
Poisson's number	0.33

5754 Aluminum Mechanical Properties

Aluminum 5754 mechanical properties are listed in the table below, including tensile strength, yield strength, elongation, hardness, etc.

EN 485-2

DIN EN 485-2: Aluminum and aluminum alloys - Strips, sheets and plates - Part 2: Mechanical properties

EN 485-2, Mechanical properties of EN AW-5754
Material temper	Nominal thickness, mm	Tensile Strength, Mpa	0.2% yield strength, Mpa, ≥	Elongation, 50 mm, %, ≥	Elongation, 5.65√So, %, ≥	Bending radius, 180° (a)	Bending radius, 90° (a)	Hardness, HBW (a)
F (a)	≥ 2,5-100	≥190	-	-	-	-	-	-
	100-150	≥180
Al 5754-O, Al 5754-H111	0,2-0,5	190-240	80	12	-	0,5 t	0 t	52
	0,5-1,5			14		0,5 t	0,5 t
	1,5-3,0			16	-	1,0 t	1,0 t
	3,0-6,0			18	-	1,0 t	1,0 t
	6,0-12,5			18	-	-	2,0 t
	12,5-100			-	17	-	-
Al 5754-H112	≥ 6,0-12,5	≥190	100	12	-	-	-	62
	12,5-25,0		90	-	10			58
	25,0-40,0		80	-	12			52
	40,0-80,0		80	-	14			52
H12	0,2-0,5	220-270	170	4	-	-	-	66
	0,5-1,5			5	-
	1,5-3,0			6	-
	3,0-6,0			7	-
	6,0-12,5			9	-
	12,5-40,0			-	9
H14	0,2-0,5	240-280	190	3	-	-	-	72
	0,5-1,5			3	-
	1,5-3,0			4	-
	3,0-6,0			4	-
	6,0-12,5			5	-
	12,5-25,0			-	5
H16	0,2-0,5	265-305	220	2	-	-	-	80
	0,5-1,5			3
	1,5-3,0			3
	3,0-6,0			3
H18	0,2-0,5	≥290	250	1	-	-	-	88
	0,5-1,5			2
	1,5-3,0			2
Al 5754-H22, H32	0,2-0,5	220-270	130	7	-	1,5t	0,5t	63
	0,5-1,5			8	-	1,5t	1,0t
	1,5-3,0			10	-	2,0t	1,5t
	3,0-6,0			11	-	-	1,5t
	6,0-12,5			10	-	-	2,5t
	12,5-40,0			-	9	-	-
H24, H34	0,2-0,5	240-280	160	6	-	2,5 t	1,0 t	70
	0,5-1,5			6	-	2,5 t	1,5 t
	1,5-3,0			7	-	2,5 t	2,0 t
	3,0-6,0			8	-	-	2,5 t
	6,0-12,5			10	-	-	3,0 t
	12,5-25,0			-	8	-	-
H26, H36	0,2-0,5	265-305	190	4	-	-	1,5 t	78
	0,5-1,5			4			2,0 t
	1,5-3,0			5			3,0 t
	3,0-6,0			6			3,5 t
H28	0,2-0,5	≥290	230	3	-	-	-	87
	0,5-1,5			3
	1,5-3,0			4

Note: (a) For information only.

EN754-2

EN 754-2: Aluminum and aluminum alloy drawn bars and tubes - Part 2: Mechanical properties

EN 754-2, Drawn bars
Material temper	Dimensions (mm)	Tensile Strength, Mpa	0.2% yield strength, Mpa, ≥	Elongation, 5.65√So, %, ≥	Elongation, 50 mm, %, ≥	Hardness (HBW), typical value
Al 5754-H111, O	d≤80; S≤60	180-250	80	16	14	45
H14, H24, H34	d≤25; S≤5	240-290	180	4	3	75
H18, H28, H38	d≤10; S≤5	≥280	240	3	2	88

EN 754-2, Drawn tubes
Material temper	Wall thickness, t (mm)	Tensile Strength, Mpa	0.2% yield strength, Mpa, ≥	Elongation, 5.65√So, %, ≥	Elongation, 50 mm, %, ≥	Hardness (HBW), typical value
Al 5754-H111, O	≤ 20	180-250	80	16	14	45
H14, H24, H34	≤ 10	240-290	180	4	3	75
H18, H28, H38	≤ 5	≥280	240	3	2	88

Note: Dimensions: d = diameter of round bars; S = width across flats of square and hexagonal bars, thickness of rectangular bars

EN755-2

DIN EN 755-2: Aluminum and aluminum alloy extruded bars, tubes and profiles - Part 2: Mechanical properties

EN 755-2 Extruded bars
Material temper	Dimensions (mm)	Tensile Strength, Mpa	0.2% yield strength, Mpa, ≥	Elongation, 5.65√So, %, ≥	Elongation, 50 mm, %, ≥	Hardness (HBW), typical value
F (a) , H112	d≤150	180	80	14	12	47
	150<d,s≤ 250	180	70	13	-	47
Al 5754-H111, O	d≤150	180-250	80	17	15	45

EN 755-2 Extruded tubes
Material temper	Wall thickness, t (mm)	Tensile Strength, Mpa	0.2% yield strength, Mpa, ≥	Elongation, 5.65√So, %, ≥	Elongation, 50 mm, %, ≥	Hardness (HBW), typical value
F (a), H112	≤ 25	180	80	14	12	47
Al 5754-H111, O	≤ 25	180-250	80	17	15	45

EN 755-2 Extruded profiles
Material temper	Wall thickness, t (mm)	Tensile Strength, Mpa	0.2% yield strength, Mpa, ≥	Elongation, 5.65√So, %, ≥	Elongation, 50 mm, %, ≥	Hardness (HBW), typical value
F (a) , H112	≤ 25	180	80	14	12	47

Note:

• Dimensions: d = diameter of round bars; S = width across flats of square and hexagonal bars, thickness of rectangular bars.
• (a) Material condition F: The values are for information only.

5754 Aluminum Equivalent Material

5754 aluminum equivalent material is listed in the table below including US ASTM; ISO, Australian AS/NZS; Japanese JIS and Chinese GB standard.

Note: DIN 1725-1 has been replaced by DIN EN 573-3.
 

5754 Aluminum Equivalent Material

European

Germany

US

ISO

Japan

Australia

China

Standard

Numeric (Chemical Symbols)

Standard

Designation (material number)

Standard

AA (UNS)

Standard

Aluminium

Standard

Aluminium

Standard

Aluminium

Standard

Aluminium

EN 573-3

EN AW-5754

DIN 1725-1

AlMg3 (3.3535)

ASTM B209/B209M

5754 (UNS A95754)

ISO 6361;

AW-5754

JIS H4000;

5754

AS 2848.1,

5754

GB/T 3190;

5754

(AlMg3)

ISO 209

JIS H4040

AS/NZS 1734,

GB/T 3880.2

AS/NZS 1865,

AS/NZS 1866