Fpa PTFE Lined Dismountable Stainless Steel Ball Valve

• Customization: Available
• Media: Water,Gas,Oil,Steam
• Certification: ISO, DN,ASTM,JIS
• Model NO.: MV210113
• Pressure: Low Pressure
• Temperature: High Temperature
• Connection: Flange
• Material: Cast Iron
• Type: Ball Float
• Trap Type: Fpa PTFE Lined
• Application: Gas,Oil,Water,Steam
• End Connection: Flange
• Transport Package: in Wooden Case or Pallet
• Specification: 2" to 8"
• Trademark: Kingmetal
• Origin: China
• HS Code: 8481804090
• Production Capacity: 500 PCS Per Month

Product Description

FPA PTFE Lined Dismountable Stainless Steel ball Valve
 

SPECIFICATIONS FOR FREE FLOATING BALL STEAM TRAP VALVES
Pressure rating and size:	PN10, PN16, CL125, CL 150, JIS 10K
	DN50 to DN200
	2"~8"
Material:	PFA/FPTE lined, stainless steel 304,316
Flange connection:	EN1092, ANSI B16.5, BS4504, JIS B2212
Medium(Service fluid):	Steam, Gas,Oil,water
Temperature:	-268 dg to 429 dg

Lining Material: PFA, PTFE

Applicable medium:
Able to transport any concentration of acid, alkali, organic solvents, strong oxidant, toxic and volatile, flammable chemicals.

Specification Instruction:
We manufactures PTFE lined pipe and fittings by compression molding, isostatic molding, injection molding, transfer molding,
hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:

• Working temperature is high at the range of -29°C-200°C; except the molten alkali metals, element fluorine and aromatic
hydrocarbon, lined products can be used in any chemical medium.
• Vacuum resistance. In the range of -29°C-150°C, it is applicable for vacuum condition. In chemical production, the vacuum
condition occurs due to cooling, longitudinal emissions, or medium backflow.
• High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0 MPa.
• Resistance to penetration. Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining
processing, make it excellent antiosmosis.
• PTFE advanced lining molding process achieved the status of syn chronous hot expansion or cold shrinkage for steel components
and fluorine plastic.
• Kaxite us adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide
convenience for installation.

Data sheet
Specific Gravity: 2.14-2.19g/cm3 as per ASTM D 792 test standard.

Tensile Rate: 20.7Mpa minimum as per ASTM D 638 test standard.

Elongation Rate: 250% minimum as per ASTM D 638 test standard.


Product Show:Production line:Packing & Shipping: