GOST 17378 12X18h10t Stainless Steel Reducers

• Customization: Available
• Material: Stainless Steel
• Technics: Press-Forming
• Model NO.: KM-20230310
• Customized: Non-Customized
• Grade: Ss321 12X18h10t
• Transport Package: in Seaworthy Plywood Cases or Pallets
• Specification: 1/2′′ to 72′′
• Trademark: KINGMETAL
• Origin: China
• HS Code: 7307230000
• Production Capacity: 1000 Tons Per Month

Product Description

GOST 17378 12X18H10T Stainless Steel Reducers
 

 

Product name	12X18H10T Stainless Steel Reducer
Type	Concentric Reducer,Eccentric Reducer
Sizes	From 1/2'' to 24''
Thickness	1mm~30mm or SCH20, SCH30, SCH40, STD, SCH80, SCH100. SCH120, SCH160. XXS
Standard	GOST17378 EN10253-2 ASME B16.9
Surface	Polishing,Sandbrasting. Bright finishing.
Usage	Petroleum,chemical ,electric power , metallurgy , shipbuilding, construction etc.
Package	Seaworthy package . Wooden or plywood case or pallet , or as customers' request
Sample	available
Remark	Special design is available as customers' requirement

Usage Petroleum,chemical ,electric power , metallurgy , shipbuilding, construction etc. Package Seaworthy package . Wooden or plywood case or pallet , or as customers' request Sample available  Remark Special design is available as customers' requirement.

12X18H10Tstainless steel chemical composition is listed in the following table based on cast analysis.
Chemical Composition, %
Standard	AISI Type	C, ≤	Si, ≤	Mn, ≤	P, ≤	S, ≤	Cr	Ni	N, ≤	Other Elements
EN10253-2, GOST17376	12X18h10t	0.08	1	2	0.045	0.03	17.0-19.0	9.0-12.0	0.1	≥ Ti 5×(C+N), ≤ 0.70
	12X18h10t	0.04-0.10	1	2	0.045	0.03	17.0-19.0	9.0-12.0	0.1	≥ Ti 4x(C+N), ≤ 0.70

 

 

12X18H10T Mechanical Properties
AISI Type (UNS)	Conditions	Tensile Strength, MPa (ksi), ≥	0.2% Yield Strength, MPa (ksi), ≥	Elongation in 50 mm (2 in.), %, ≥	Reduction of Area, %, ≥	Brinell Hardness (HBW), ≤	Rockwell Hardness (HRBW), ≤
12X18H10T	Annealed, Hot finished	515 (75)	205 (30)	40	50	-	-
	Annealed, Cold finished, Dia ≤ 12.7 mm (0.5 in.)	620 (90)	310 (45)	30	40	-	-
	Annealed, Cold finished, Dia > 12.7 mm (0.5 in.)	515 (75)	205 (30)	30	40	-	-
	Annealed,  Sections ≤ 5 in. (127 mm)	515 (75)	205 (30)	40	50	-	-
	Annealed,  Sections > 5 in. (127 mm)	70 (485)
12X18H10T	-	515 (75)	205 (30)	40	-	201	92