EN10028-2 16MO3,13CrMo45,10CrMo910 Chrome Moly Steel plate
The European steel standard well known for pressure vessel purposes is EN 10028-2 which includes chrome moly plates.
The overall designation of the standard is "flat products made of steels for pressure purposes.
Non-alloy and alloy steels with detailed improved temperature properties.
Chrome moly material grades with various portions of chromium and molybdenum.
Extensively equal to the ones inside the American standard ASME SA387 and ASTM A387
EN 10028-2 chrome moly plate.
Kingmetal supplies chrome moly plates to EN 10028-2, 16MO3 PLATE, 13CRMO45 PLATES, 10CRMO910 PLATES and, when required by our customers, can offer cut to size plates and profiles to meet exact requirements.
16MO3 PLATE, 13CRMO45 PLATE, 10CRMO910 PLATE Specification
| Grade |
16MO3 , 13CRMO45 , 10CRMO910 |
| Plate Specifications |
EN10028-2 |
| Plate Standard |
ASTM, ASME, and API |
| Steel plates Thickness |
8-700mm |
| Plate Width |
1500- 4020mm |
| Length |
3000-27000mm |
| Weight |
Max 35 tons per plate |
| Plates Delivery Condition |
AR, TMCP, N, T, A, N&T, Q&T as required, as well as Z15, Z25, Z35. |
| Packing |
Loose, Bundle and Bare, According to Customer requirement |
| Application |
Petroleum, power plants, chemical engineering, boilers and other industries for the production of the reactor, heat exchangers, boiler, separators, tank, gas tank, liquefied petroleum gas cylinders, Hydropower high-pressure pipes, turbine spiral case equipment and components. |
| Specialize |
Shim Sheet, Perforated Sheet, B. Q. Profile. |
| Plates Form |
Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
| Steel plates Finish |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Plates Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Chemical Requirements
(cast analysis, % by mass, maximum permitted unless indicated otherwise)
| |
16MO3 |
13CRMO4-5 |
13CRMOSI5-5 |
10CRMO9-10 |
12CRMO9-10 |
X12CRMO5 |
X10CRMOVNB9-1 |
| C |
0.12-0.20 |
0.08-0.18 |
0.17 |
0.08-0.14 |
0.10-0.15 |
0.10-0.15 |
0.08-0.12 |
| Si |
0.35 |
0.35 |
0.50-0.80 |
0.50 |
0.30 |
0.50 |
0.50 |
| Mn |
0.40-0.90 |
0.40-1.00 |
0.40-0.65 |
0.40-0.80 |
0.30-0.80 |
0.30-0.60 |
0.30-0.60 |
| P |
0.025 |
0.025 |
0.015 |
0.020 |
0.015 |
0.020 |
0.020 |
| S |
0.010 |
0.010 |
0.005 |
0.010 |
0.010 |
0.005 |
0.005 |
| N |
0.012 |
0.012 |
0.012 |
0.012 |
0.012 |
0.012 |
0.03-0.07 |
| Cr |
0.30 |
0.70-1.15 |
1.00-1.50 |
2.00-2.50 |
2.00-2.50 |
4.00-6.00 |
8.00-9.50 |
| Cu |
0.30 |
0.30 |
0.30 |
0.30 |
0.25 |
0.30 |
0.30 |
| Mo |
0.25-0.35 |
0.40-0.60 |
0.45-0.65 |
0.90-1.10 |
0.90-1.10 |
0.45-0.65 |
0.85-1.05 |
| Nb |
- |
- |
- |
- |
- |
- |
0.06-0.10 |
| Ni |
0.30 |
- |
0.30 |
- |
0.30 |
0.30 |
0.30 |
| V |
- |
- |
- |
- |
- |
- |
0.18-0.25 |
Mechanical Properties
Mechanical properties for plates thicker than 16 mm up to 40 mm thick applicable to the transverse direction
| |
YIELD (MPA) |
TENSILE (MPA) |
ELONG. A (%) |
IMPACT (J)* |
| 16Mo3 |
270 min |
440 - 590 |
22 min |
31 min |
| 13CrMo4-5 |
290 min |
450 - 600 |
19 min |
31 min |
| 13CrMoSi5.5 |
310 min |
510 - 690 |
20 min |
34 min |
| 10CrMo9-10 |
300 min |
480 - 630 |
18 min |
31 min |
| 12CrMo9-10 |
355 min |
540 - 690 |
18 min |
70 min |
| X12CrMo5 |
320 min |
510 - 690 |
20 min |
40 min |
| X10CrMoVNb9-1 |
445 min |
580 - 760 |
18 min |
40 min |
Audited Supplier 
){kind=link}