GB5310 20g Heavy Wall Thickess Tube For High Pressure Boiler
Heavy wall pipe is specified for applications where greater volume is carried, where greater internal pressures exist within the pipe or where the pipe walls must be stronger to support the external burden such as the cover under which they are layed.
Heavy wall pipe is also known as Extra Strong or Extra Heavy pipe. There's also a Double Extra Strong designation for pipe that's heavier than Schedule 120 pipe.
Generally, light wall, heavy wall and double extra strong pipe is clearly marked with schedule numbers near the ends of each pipe segment as follows:
Standard:GB 5310
Seamless steel tubes and pipes for high pressure boiler
GB 5310 standard is applicable to steam boilers and pipeline seamless pipes for the manufacture of high pressure and above.
20G steel pipe is GB / 5310 national standard steel grade (foreign corresponding brands: Germany ST45.8, Japan stb42, America sa106b), which is the most commonly used boiler steel pipe.
GB / 5310 20G steel pipe has certain strength at normal and medium high temperature, low carbon content, better plasticity and toughness, and good cold and hot forming and welding performance.
GB 5310 20G Seamless steel tubes and pipes for high pressure boiler
20G (high quality carbon structural steel pipe) supplied according to GB5310 is used as heating surface pipe fittings, and the maximum wall temperature for long-term use is ≤ 450 ° C. when GB5310 20G seamless steel pipe is used as header and steam pipe, the long-term use temperature shall be ≤ 425 ° C.
GB 5310 20G High Pressure Boiler Tubes Quick Details
Manufacture:Seamless process ,Hot-finished or Cold-finished
Wall thickness(WT): 2.8 mm--150 mm.
Outer diameter (OD): 23 mm--1500 mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded
Chemical composition of GB 5310 20G
Grade |
Chemical Composition(%) |
C |
Si |
Mn |
Cr |
Mo |
V |
Ni |
Altot |
Cu |
P |
Max |
20G |
0.17~0.23 |
0.17~0.37 |
0.35~0.65 |
≤0.25 |
≤0.15 |
≤0.08 |
≤0.25 |
≤0.015 |
≤0.20 |
0.025 |
Mechanical properties of GB 5310 20G
Steel Pipe |
Tensile properties |
Impact energy(Akv),J |
Hardness |
Tensile strength
(MPa) |
Yield Strength
(MPa) |
Elongation
% |
Portrait |
Landscape |
A |
B |
C |
HBW |
HV |
HRC |
Portrait |
Landscape |
|
Max |
Min |
20G |
410~550 |
245 |
24 |
22 |
40 |
27 |
- |
- |
- |
Company Profile
From 1989 to now, Kingmetal Steel focus on manufacturing and distributing pipeline products including piping, fitting, flange, valve and fastener in stainless, carbon, alloy and duplex steel.
Kingmetal has a factory to manufacture seamless stainless steel pipe from DN6 to DN600 and distribute seamless steel pipe and fitting from top brand manufacturers such as Baosteel, Hengsteel, Tiansteel and Pansteel etc.
All of products are strictly compliance with standard, 100% inspection passed including visual, dimension and PMI test before shipment.
Both our sales and logistic teams are over 10 years of experiences and training frequently.
After- sales service with high efficiency, if any products are short quantity/weight or damaged caused by manufacturing, design or transportation can be compensated.