ASTM A234 WP91 Alloy pipe fittings
Size 1/2"TO 24"(seamless), 26" TO 48" (welded)
Pressure SCH 5S TO SCH 160, XXS
Connection Butt Welding
Standard ANSI, JIS, DIN, EN, ISO, GB, SH AND HG
Packing wooden cases or customerized
Production Capacity 1000 Tons per month
Product Range: 45, 90, 180 degree,2D,3D,4D,5D,6D.......
Standard: ASTM A234
Material:; WP1 WP5 WP9 WP11 WP12 WP22 WP91
1. Chemical Composition Requirements
Chemical Composition (%) of ASTM A234/A234M |
Grade
|
Type |
C |
Si |
S |
P |
Mn |
Cr |
Ni |
Mo |
Other |
ób |
ós |
δ5 |
WP91 |
0.08-0.12 |
0.2-0.5 |
0.01 |
0.02 |
0.3-0.6 |
8-9.5 |
0.4 |
0.85-1.05 |
See sdandard |
585-760 |
415 |
20 |
248 |
2. Mechanical Properties
Mechanical Properties of ASTM A234 Alloy Steel Pipe Fittings |
Grade |
Tensile Strength, min. ksi[MPa] |
Yield Strength, min. ksi[MPa] |
Elongation, min. % |
Longitudinal |
Transverse |
WP91 |
90[620] |
60[415] |
20 |
13 |
3. Heat Treatment
Pipe fittings of ASTM A234 alloy steel, after forming at an elevated temperature, shall be cooled to a temperature. below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air.
- Grade WP911 shall be normalized in the temperature range of 1900 to 1975 °F [1040 to 1080 °C], and tempered in the temperature range of 1365 to 1435 °F [740 to 780 °C] as a final heat treatment.