| Customization: | Available |
|---|---|
| Type: | Alloy Steel Bar |
| Standard: | AISI, ASTM, GB, JIS, DIN, BS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Items | Material grade |
| Cold Work Steel | HCHCR-D2 |
| HCHCR-D3 | |
| A2 | |
| O1 | |
| Plastic Mould Steel | |
| P20+Ni | |
| P20 | |
| Hot Work Steel | DB6 |
| H13 | |
| H11 | |
| H21 | |
| H10 | |
| H12 | |
| High Speed Steel | M2 |
| M35 | |
| M42 | |
| T1 | |
| Alloy Steel | EN24 |
| EN31 | |
| EN353 | |
| 8620 | |
| 4140 | |
| 16MnCr5 | |
| 20MnCr5 |
Smelting Method
Non-Vacuum Induction Furnace + LF + ESR
Feature
(1) It has high hardenability and high toughness;
(2) Excellent resistance to thermal cracking, water cooling can be used in the workplace;
(3) With moderate wear resistance, carburizing or nitriding can also be used to increase the surface hardness, but the thermal crack resistance should be slightly reduced;
(4) Because of its low carbon content, the secondary hardening ability during tempering is poor;
(5) It has the ability to resist softening at a higher temperature, but the hardness drops rapidly when the use temperature is higher than 540°C (1000°F) (that is, the able working temperature is 540°C);
(6) The deformation of heat treatment is small;
(7) Medium and high machinability;
(8) Medium resistance to decarburization.
What is more noticeable is that it can also be used to make important components in the aviation industry.
){kind=link}