JIS G3462 Stba 24 Alloy Steel Boiler and Heat Exchanger Tube

• Customization: Available
• After-sales Service: According to The Actual Project Application
• Warranty: According to The Actual Project Application
• Model NO.: KM-20230508
• Technique: Cold Drawn
• Material: Alloy Steel
• Surface Treatment: Varnishing, Light Oils,Varnishing or Black Painting
• Usage: Boiler Pipe, Oil/Gas Drilling, Heat Exchanger Tubes
• Section Shape: Round
• Standards: JIS G3462 ,JIS G3461
• Materials: Stba 20,Stba 23,Stba 24,Stba 25,Stba 26
• Production Process: Cold Drawn or Hot Rolled
• Application: Heat Exchanger Tubes, Condenser Tubes, Water Tubes
• Transport Package: in Bundles or Plywood Cases
• Specification: 15.9mm to 139.8mm
• Trademark: KINGMETAL
• Origin: China
• HS Code: 7304511090
• Production Capacity: 1000 Tons Per Month

Product Description

JIS G3462 STBA 24 Alloy steel boiler and heat exchanger tube
 

Standard: JIS G3462
Equivalent Standards: ASTM A213, ASTM A335, EN 10216-2, DIN 17175, BS 3059, BS 3606, ISO 9329-2, ISO 9330-2, BS 3604

Material: STBA 24
Equivalent Material: T22, 10CrMo910, 622, 1.7380, P22, 622-490, 10CrMo9-10

Chemistry Composition

C, %	Si, %	Mn, %	P, %	S, %	Cr, %	Mo, %
0.15 max	0.50 max	0.30-0.60	0.030 max	0.030 max	1.90-2.60	0.87-1.13

Mechanical Properties

Tensile Strength , MPa	Yield Strength, MPa	Elongation, %	Hardness, HRB
410 min	205 min	30 min	85 max

Outside Diameter & Tolerance

Hot rolled	Outside Diameter, mm	Tolerance, mm
	OD<100	+0.4/-0.8
	100≤OD<160	+0.4/-1.2
	160≤OD<200	+0.4/-1.8
	OD≥200	+0.4/-2.4
Cold Drawn	Outside Diameter, mm	Tolerance, mm
	OD<25	±0.10
	25≤OD<40	±0.15
	40≤OD<50	±0.20
	50≤OD<60	±0.25
	60≤OD<80	±0.30
	80≤OD<100	±0.40
	100≤OD<120	+0.40/-0.60
	120≤OD<160	+0.40/-0.80
	160≤OD<200	+0.40/-1.20
	OD≥200	+0.40/-1.60

Wall thickness & Tolerance

Hot rolled	Outside Diameter, mm	Tolerance, %
	OD<100, WT<2.0	-
	OD<100, 2.0≤WT<2.4	+40/-0
	OD<100, 2.4≤WT<3.8	+35/-0
	OD<100, 3.8≤WT<4.6	+33/-0
	OD<100, WT≥4.6	+28/-0
	OD≥100, WT<2.0	-
	OD≥100, 2≤WT<2.4	-
	OD≥100, 2.4≤WT<3.8	+35/-0
	OD≥100, 3.8≤WT<4.6	+33/-0
	OD≥100, WT≥4.6	+28/-0
Cold Drawn	Outside Diameter, mm	Tolerance, %
	OD<40, WT<2.0	+0.40mm/-0mm
	OD<40, WT≥2.0	+20/-0
	OD≥40	+22/-0

JIS G3462 specifies alloy steel tubes used for heat transfer, for instance, water tubes, smoke pipe, superheater tube, air preheater tube, heat exchanger tubes, condenser tubes which are widely used in the chemical and petroleum industry. JIS G3462 usually applies to tubes with an outer diameter of 15.9mm to 139.8mm.

Manufacture: tubes to JIS G3462 shall be manufactured by hot rolled or cold drawn process.
Heat Treatment: full or isothermal anneal, normalize and temper.
Inspection & Test: chemistry composition analysis, tensile test, hardness test, flattening test, flaring test, NDT, surface inspection and dimension check.

Length: 5800mm; 6000mm; 6096mm; 7315mm; 11800mm; 12000mm; and so on.
Max developed length: 30 meters, also U bending, finning, studded process can be provided.
Option: shot blasting on the outside surface to remove mill scale, make the surface matte colour; surface polishing as preparation work done for further processing, for instance finning.

Keyword: JIS G3462, ASTM A213, ASTM A209, EN 10216-2, DIN 17175, BS 3059, BS 3606, Heat Exchanger Tubes