N04400 Monel 400 Nickel Alloy Pipe&bars
| Size |
Plate/Sheet:0.3-60mm(THK)*1220mm(WIDTH)*6000mm(LENGTH) |
| Bar:Round:Φ5.5-350mm |
| Wire:Φ0.1mm-18mm |
| Seamless Pipe:6mm-219mm(OD)*0.5mm-18mm(WT) |
| Flange:1/2"-56" |
| Fitting:According to the drawing. |
| Material |
Austenite Stainless Steel:Rs-2,317L,904L,253Ma(S30815),254SMo(F44/S31254) |
| Biphase stainless steel F51(S31803),F53(S32750),F55(S32760),329(S32900),A4 |
| Hastelloy C276,Hastelloy C4, Hastelloy C22. Hastelloy B,Hastelloy B-2 |
| Nitronic50(S20910/XM-19), Nitronic60(S21800/Alloy218), Alloy20Cb-3, Alloy31(N08031/1.4562) |
| Incoloy825, 309S, Inconel601,A286, Alloy59, 316Ti, SUS347, 17-4PH Nickle201... Ect. |
| Monel400, Monel k500, Ninckel200, Nickel201(N02201) |
| Inconel600(N06600),Inconel601(N06601),Inconel625(N06625/NS336),Inconel718(N07718/GH4169),Inconelx-750(N07750/GH4145) |
| Incoloy800H(NS112/N08810),Incoloy800HT(N08811),Incoloy800(NS111/N08800),Incoloy825(N08825/NS142), Incoloy901,Incoloy925(N09925),Incoloy926 |
| 1J50,1J79,3J53,4J29(F15),4J36(Invar36) |
| GH2132(incoloyA-286/S66286),GH3030,GH3128,BH4145(inconelx-750/N07750),GH4180(N07080/Nimonic80A) |
| Product range |
Bolt,nut,screw,washer, thread rod ,flange, fitting, seamless tubes, round bar, plate, wire |
1. Product descroption
Introduction
N04400 Monel 400 Nickel Alloy Pipe is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline Senvironments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.
Chemical Composition of N04400 Monel 400 Nickel Alloy Pipe
The compositional range for N04400 Monel 400 Nickel Alloy Pipe is provided in the table below.
| Element |
Content |
| Ni |
63 % min |
| Cu |
28 - 34 % |
| Fe |
2.5 % max |
| Mn |
2 % max |
Typical Properties of N04400 Monel 400 Nickel Alloy Pipe
Typical properties of N04400 Monel 400 Nickel Alloy Pipe are covered in the following table.
| Property |
Metric |
Imperial |
| Density |
8.8 g/cm3 |
0.318lb/in3 |
| Melting point |
1350°C |
2460°F |
| Co-Efficient of Expansion |
13.9µm/m.°C
(20-100°C) |
7.7x10-6 in/in.°F
(70-212°F) |
| Modulus of rigidity |
65.3 kN/mm2 |
9471 ksi |
| Modulus of elasticity |
105-120 kN/mm2 |
15230-17405 ksi |
Properties of Supplied Materials and Heat Treated Materials
| Condition of Supply |
Heat Treatment (After Forming) |
| Annealed/Spring Temper |
Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool. |
| Condition |
Approx Tensile Strength |
Approx Service Temp. |
| Annealed |
400 - 600 N/mm2 |
58 - 87 ksi |
-200 to +230°C |
-330 to +445°F |
| Spring Temper |
850 - 1050 N/mm2 |
123 - 152 ksi |
-200 to +230°C |
-330 to +445°F |
Relevant Standards
N04400 Monel 400 Nickel Alloy Pipe is covered by the following standard:
BS 3075
3076 NA 13
DTD 204B
ASTM B164
Equivalent Materials
Equivalent materials to N04400 Monel 400 Nickel Alloy Pipe are:
W.NR 2.4360
W.NR 2.4361
UNS N04400
AWS 040
Applications of N04400 Monel 400 Nickel Alloy Pipe
N04400 Monel 400 Nickel Alloy Pipe typically finds application in:
Marine Engineering
Chemical Processing
Hydro-carbon Processing
Heat Exchangers
Audited Supplier 
){kind=link}