| Customization: | Available |
|---|---|
| Type: | Seamless |
| Technique: | Cold Drawn |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
L80 CASING
L80 belongs to steel grades group of corrosion-resistant casing. L80 API oilfield casing pipe includes L80-1, L80-9Cr, and L80-13Cr. L80-1 is used in the H2S environment, while L80-9Cr and L80-13Cr are used in the CO2 environment. In the corrosive environment in which carbon dioxide predominates, Super 13Cr has a higher corrosion resistance than L80-13Cr. With relatively high price, the product applies to more complicated geological conditions, and runs down deeper into the well. In the exploitation of oil and gas, the use of L80 is less frequent than J55, N80 and other materials.
J55 CASING
The J55 API-5CT casing pipe is a comparatively low steel grade in oil drilling. It is widely applied for shallow oil and gas extraction.Because of its low cost among other grades of steel, it enjoys wider applications, can be generally used in shallow wells, geothermal wells, and water wells.
N80 CASING
API-5CT N80 oilfield casing pipe contains N80-1 and N80-Q types. Those two materials are absolutely consistent regarding the chemical composition and mechanical attributes, they are just various in the heat treatment.During heat treatment, N80-1 steel is treated by normalizing and tempering, while N80Q steel is treated by quenching and tempering. Therefore, the collapsing strength and internal pressure strength of N80Q are higher than that of N80-1. N80-1 or N80Q should be clearly shown by the designer when N80 casing is selected.As its mechanical properties are higher than J55 and K55 types, it may very well be utilized to certain a little more challenging formations. With deeper downhole depth than J55 and K55 types, it can be applied for the exploitation of middle-level oil and gas. Due to the high capability of N80 material, those API-5CT casing pipes are broadly applied in natural gas as well as coal bed methane extraction, and geothermal wells.
P110 CASING
The P110 API-5CT steel casing pipe is the high grade amongst other grades of steel. White band is marked on the finished casing to point out the materials. During petroleum drilling and producing, this pipe is generally used in a variety of complicated territory due to its higher tensile strength and higher yield.It goes down the deepest into the well among other types. However, the price is comparatively high, as well as the quantity of usage is comparatively few. P110 casing pipe is mainly used in a particular surroundings and when the drilling depth extends to a particular level.
MECHANICAL PROPERTIES OF API 5CT MATERIAL GRADES
Group Grade Type Total elongation under load % Yield strength MPa Tensile strength min. MPa Hardness a max. Specified wall thickness mm Allowable hardness variation b HRC
min. max . HRC HBW
ied, but the maximum variation is restricted as a manufacturing control in accordance with 7.8 and 7.9 of API Spec. 5CT.
API 5CT casing pipe is used to support the oil and gas pipe wall and to ensure the drilling process and the post-completion wells' normal operation. Each well depending on the depth of drilling and geological conditions, uses several layers of casing. After cementing casing to be used to go down, it is different from tubing, and drill pipe and can not be reused, a one-time consumable material. Therefore, the casing consumption accounts for over 70% of all the oil well pipe. According by usage can be divided into the sleeve pipe, surface casing, casing, and production casing.
){kind=link}