| Customization: | Available |
|---|---|
| Type: | Seamless |
| Technique: | Cold Drawn |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Aluminum alloy 6351 is Al-Mg alloy and it has good workability and corrosion resistance and is readily weldable by all methods. 6351 aluminum alloy has high strength in 6xxx series alloy, which is higher than in 6061, but lower than 6082 alloys. For example, 6351-t6 requires a minimum tensile strength of 295Mpa and good extrusion formability. 6351 is the aluminum material in temper T6 is well finished,it offers excellent mechanical properties as well as reasonable corrosion resistance. Grade 6351-T6 for gas cylinder conforms to ASTM B221, ASTM B241, ASTM B429, and etc.
High-pressure aluminum alloy gas cylinder is a seamless pressing by aluminum plate, has been widely used in industrial special gases, standard gases, mixed gases and high purity gases such as dry air, carbon monoxide, oxygen, helium, ethylene, methane, carbon dioxide and so on. The gas cylinder made of aluminum alloy has the advantages of excellent low-temperature impact, lightweight (lighter than carbon steel, manganese steel) and corrosion resistance.
NPS: 1/4" through 12"
Schedules: 10, 40, 80
Tempers: T6 (Solution heat treated + artificially aged)
Available specification for 6351:
ASTM B-210 Drawn Seamless Aluminum Alloy Tubes for General Purpose & Pressure Applications.
ASTM B-221 Extruded Aluminum Alloy Tubes for General Purpose Applications.
ASTM B-241 Seamless Extruded Aluminum Alloy Pipe & Tube for General Purpose & Pressure Applications.
6351-T6 Chemical Composition
|
Al |
Si |
Fe |
Cu |
Mn |
Mg |
Zn |
Ti |
|
Bal |
0.70-1.30 |
≤0.50 |
0.1 |
0.4-0.8 |
0.4-0.8 |
≤0.2 |
≤0.2 |
|
Tensile Strength, Mpa |
Yield Strength, Mpa |
Elongation |
|
320 |
260 |
8.1 |
6351 T6 pipe and tube is the alloy material commonly used in standard ASTM B221, ASTM B241, ASTM B429 with Solution heat treated and artificially aged. As a leading manufacturer, supplier and distributor, Kingmetal offers and 6351 T6 seamless aluminum pipes in various sizes and specifications even the size hard to find.
KINGMETAL has various types of carbon steel tubes / pipes to meet your various needs.
| Material | API SPEC 5L | A25, A25A, B, X42, X46, X52, X56, X60, X65, X70, X80, X90, X100 | |
| ASTM A53/ASME SA53 | Grade A, Grade B, | ||
| ASTM A106/ASME SA106 | Grade A, Grade B, Grade C | ||
| ASTM A210/ASME SA210 | Grade A-1, Grade C | ||
| ASTM A500/ASME SA500 | Grade A, Grade B, Grade C, Grade D | ||
| ASTM A501/ASME SA501 | Grade A, Grade B | ||
| ASTM A556/ASME SA556 | Grade A2, B2, C2 | ||
| BS 3059 | 320, 360, 440, 620-460, 629-590, 762 | ||
| EN 10216-1&2 | P195, P235, P265 | ||
| EN10297-2 | E235, E275, E315, E355a, E470, C22E, C35E, C45E | ||
| EN10210-1 | S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355K2H | ||
| DIN 1629 | st37.0, st44.0, st52.0 | ||
| DIN 1630 | st37.4, st44.4, st52.4 | ||
| DIN 2391 | st35, st45, st52 | ||
| DIN 17175 | st35.8, st45.8 | ||
| JIS G3429 | STH11, STH 12 | ||
| JIS G3444 | STK290, STK400, STK500, STK490, STK540 | ||
| JIS G3454 | STPG370, STPG410 | ||
| JIS G3455 | STS370, STS410, STS480 | ||
| JIS G3456 | STPT370, STPT410, STPT480 | ||
| JIS G3460 | STPL380 | ||
| JIS G3461 | STB340, STB410, STB510 | ||
| JIS G3464 | STBL380 | ||
| JIS G3475 | STKN400W, STKN400B, STKN490B | ||
| Size | O.D:6-2500mm W.T:0.9-120mm Length: 5.8m, 6m, 11.8m, 12m, or as required. | ||
| Technique | 1) Hot Rolled | Package | 1) Export standard package |
| 2) Cold Drawn | 2) bundled wooden box | ||
| 3) Cold Rolled | 3) suit for all kinds of transport, or be require | ||
){kind=link}