| Type: | Welded |
|---|---|
| Technique: | Cold Drawn |
| Material: | Stainless Steel /Carbon Steel |
| Surface Treatment: | Oiled |
| Usage: | Boiler Pipe, Construction & Decoration, Special Purpose |
| Section Shape: | Round |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Aluminum extruded fin tube
Aluminum extruded fin tube is widely applied in barley malt, paper mill, timber drying, tobacco, food processing, coal mining, petrochemical, chemical fiber, construction materials, printing and dyeing, as more than 30 industries.
Meantime, they are also complementing for equipment such as air conditioner, drying oven, drying room, air coolers and so on.
Extruded aluminum fin tube is rolled as an integrity with no thermal contact resistance, high intensity, featured in thermal shock and mechanical shock resistance. Heat exchangers assembled with this kind of fin tube (extruded fin type) is much better than the one equipped with string fin tubes or hectically wound fin tubes (L/LL/KL type fin).
Extruded Aluminum Finned Tubes, also known as "Integral Finned Tubes". Integral finned tubes are manufactured by rolling process on tubes. During finning operation, the inside diameter of the tubes is reduced and helical fins are rolled on the tube wall. The tubes material can be Copper Alloy, Brass Alloys, Copper Nickel Alloy, Titanium Alloy, Stainless Steel, Duplex Stainless Steel etc. The pressure required to extrude fins from the aluminum sleeve creates an excellent "pressure bond" between the two materials.
Copper and aluminum com-posited fin tubes are rolled from a muff copper tube, advantaged in tight link, small thermal resistance, good heat transfer efficiency, small flow loss and strong corrosion resistance. When working in long time under heating and cooling conditions, they are durable and not easy to deform.
The integral extruded fin tubes is smooth on surface and easy to clean. When wet cooling in heating and air conditioning project, it is easy to remove the condensation water on the outer surface of the fin, and it is not easy to dust and scale in the heating and other heat exchange.
The fin strip is wound into a machined groove and securely locked into place by back filling with the base tube.
G fin tube consists of aluminum fin strip that is mechanically embedded into the wall of the tube. The embedding process is controlled by tooling that first plows a groove into the tubes outside diameter, then guides the base of the fin into the groove and finally locks the fin in place by rolling the groove closed on the base of the fin. This ensures that maximum heat transfer is maintained at high tube metal temperature 400°C.
The aluminum fin strip or the copper fin strip is folded into an L shape and spirally wound tightly under the action of tension on the outer surface of the base tube. Tension in the fin strip is wrapped around the tube serves to make the fin foot forcefully on the tube, thus hold the fin firmly in place.
An L-shaped foot, 1/16″ wide, is first formed on one side of the fin strip (hence the name L-Foot). The strip is then wound tightly around the tube, with the foot bearing on the tube outer surface. A typical fin spacing is 10 fins per inch of tube length - this can be varied. Tension in the fin strip as it is wrapped around the tube serves to seat the fin foot forcefully on the tube, and to hold the fin firmly in place.
Extruded aluminum finned tubes, also known as "integral finned tubes". Integral finned tubes are manufactured by rolling process on tubes. During finning operation, the inside diameter of the tubes is reduced and helical fins are rolled on the tube wall.
|
Items |
Code |
Dimensions |
Tolerances |
|
Tube outside diameter |
D1 |
Φ25~Φ219 mm |
±0.2 mm |
|
Fin outside diameter |
D2 |
Φ37~Φ279 mm |
±0.75 mm |
|
Fin pitch |
M |
4~90 mm |
±0.2 mm |
|
Fin height |
H |
6~30 mm |
±0.75 mm |
|
Tube thickness |
δ1 |
2~16 mm |
±0.15 mm |
|
Fin thickness |
δ2 |
0.8~2.5 mm |
±0.1 mm |
|
Unfinned tube ends length |
L1 |
customized |
±1‰*L1 mm |
|
Unfinned tube ends length |
L2 |
customized |
±1‰*L2 mm |
|
Maximum tube length |
L |
0.5~25 m |
±1‰*L mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}